Tekram Technology DC-820B - Manual (Page 23)

23
EISA Fast SCSI Caching Adapter
Power ON delay for SCSI devices: 30 - 120 seconds. The 30 seconds
power-on delay default is applicable to most drives. Since some slower
drives may fail to respond within the default power-on delay duration,
you may extend this time duration in order to give sufficient time for
start-up.
Controller Terminator: There are two SCSI active terminators mounted on
the top right-hand conner of the board. They can be selected to either In-
stalled or Removed by setting this option to Enable or Disable.
1.6.3 DC-820B SCSI Device Options
This field allows you to select the Cacheable device, Parity Checking, Syn-
chronous Negotiation, Disconnect/Reconnect, Max DOS disk capacity, Mir-
rored to SCSI ID, DOS device type, and Max Synchronous transfer rate.
Also, the lower screen displays the device information related to each SCSI
ID. If you are using the AMI ECU, you have to run the ACF20SU.EXE
utility located on the driver diskette after completing the ECU setup.