Chapter 4 unix lock/unlock driver packages – Tekram Technology DC-820B User Manual
Page 46
EISA Fast SCSI Caching Adapter
46
Chapter 4
UNIX LOCK/UNLOCK Driver Packages
This chapter introduces the installation procedures of UNIX LOCK/UNLOCK
support for removable media devices. It is especially important for removable
media devices that employ the caching capability supported by the DC-820B.
4.1. SCO UNIX V.3.2.2
This SCO UNIX driver is in the SCO/ISC UNIX drivers’ diskette. Since its
driver diskette is UNIX-formatted and cannot be read from DOS, you may
refer to the latest information in the README.TXT file on the DOS/NetWare
driver diskette, if necessary. A similar function is default supported in the
SCO UNIX V3.2.4. Also refer to the README.TXT file for installation
procedures, if your driver diskette is a 3"1/2 (720KB) one.
Driver installation
To install the driver, insert a working copy of the UNIX driver diskette in
drive A:
1.
To prepare the installation for 360KB driver diskette, you must type:
cd /dev
mv dsk/f0 dsk/f0.org ; mknod dsk/f0 b 2 132
mv rdsk/f0 rdsk/f0.org ; mknod rdsk/f0 c 2 132
2.
At the prompt, type:
installpkg
3.
Press <Enter> to install from floppy driver 0
4.
Press <Enter> to install the driver
5.
Press <Enter> to confirm that SCO UNIX is being installed
6.
To have the newly built UNIX take effect, reboot the system
7.
To restore the status changed in step 0, you have to type:
cd /dev
mv dsk/f0.org dsk/f0
mv rdsk/f0.org rdsk/f0
Driver removal