TechniSat Car Radio - Manual (Page 13)

Automatic Tuning System:
- Shortly push the buttons or
Depending on the button pushed the frequency range will be searched
through downwards or upwards. As soon as a station has been found
the Automatic Tuning System will be stopped.
Storing the station:
- Select a programme memory position ( - ) where you want to store
the programme.
- Push the respective numerical key on the device and hold it until a
signal tone can be heard.
The station is now stored on this programme position for the selected
frequency range. The number of the programme position is indicated on the
display.
6 1
>> <<
13
3 Detailed instructions 3 Detailed instructions
Shortly push
S
te
p
1
Shortly push
MAN
S
te
p
1
Select the desired programme position,
hold button until signal can be heard
S t e p 1
To store, push button
until signal can be heard
S t e p 3
Shortly push the desired programme
button to call up station
S t e p 1
Ste p 2
Set the
frequency
REG
AST AF TP PTY
REG
AST AF TP PTY
REG
AST AF TP PTY
Calling up the station stored as above:
- Push the respective programme memory button( - ). The
programme which is stored under this number in the selected reception
range is called up.
Manual station search:
When you are searching for stations which can only be received very weakly it
might be advantageous to enter the reception frequency manually. Proceed
as follows:
Frequency setting:
- Set the frequency range as described under 3.2.1..
- Shortly push the button to switch to manual station search.
- By means of the buttons or
you are now able to set the frequency.
>> <<
MAN
6 1
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 13