4 loudness function, 5 calling the basic settings, 6 mode switching – TechniSat Car Radio User Manual

Page 8

Advertising
background image

3.1.4 Loudness function

When the volume is low the human ear perceives bass notes worse than middle

or high notes. In order to neutralize this effect the unit is equipped with a loudness

function increasing the loudness of the bass notes electronically.

This function can be switched on resp. off as follows:

- Push the

button once to switch on.

- To switch off, push the

button once more

When loudness is switched on the letters “LOUD“ are shown on the display.

The loudness function can also be switched on/off permanently if you proceed

as follows:

- Push the

button for more than 4 seconds.

The letters “2 SPKRS“ or “4 SPKRS“ are indicated on the display.

- Push the

button once.

The message “LOUD ON“ or “LOUD OFF“ is displayed,

depending if the function is switched on or off.

- Push the

button to switch the function on or off.

The selected state is shown on the display.

After approx. 6 seconds the device changes to normal operation again. The

modification is now stored.

BAND

>>

SEL

LOUD

LOUD

3.1.5 Calling the basic settings

By using the reset function the modifications according to chapter 3.1.3 can be

removed with one single push. The settings are then set to a mean value.

Furthermore, a loudness which may have been switched on is now being

switched off.

To carry out the reset proceed as follows:

- Push the

button for approx. 4 seconds until “RESET“ appears on the

display.

The function described above is thus effected.

3.1.6 Mode switching

When a cassette is inserted the mode automatically changes to cassette

operation. As described below you can change between radio and cassette.

Consequently, when you want to listen to the radio the cassette may stay in

the cassette slot. If a CD changer is connected you can also select this one.

To change the operating mode carry out the following step:

- Push the

button, probably several times, until the desired operation

mode is set.

MODE

LOUD

8

3 Detailed instructions

3 Detailed instructions

S

te

p

1

Ste p 2

Ste p 3

S t e p 4

S t e p 1

Switch
on/off
loudness

Press for more than 4 sec.

Push once or

several times

Push once
to select
function

Switch
on/off
function

S

te

p

1

Push for
approx. 4
sec.

REG

AST

AF TP

PTY

Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 8

Advertising