TechniSat Car Radio - Manual (Page 17)

3.2.5 Stereo/mono switching
When receiving weak FM stations it can be advantageous to switch the
reception to “mono“ as follows:
- Shortly push the button.
The present setting is indicated on the display (“MONO“ or “STEREO“).
- A further push on the button switches the setting.
- After some seconds the display returns to normal operation.
The modification is now stored.
3.2.6 Display switching
By pushing the button you can switch the display of RDS programmes
between the RDS identifications frequency and programme type.
DISP
- Shortly push the button.
- The function can be switched off by pushing the button again.
- EON: This includes data of other programmes of one station chain (see
also 3.2.3).
- REG: Some stations have regional programmes which are marked with a
respective identification.
If, when searching for alternative frequencies, only the regional
programme shall be considered you can turn on the REG function as
follows:
- Push the button for more than three seconds.
The letters “REG“ are shown on the display.
This function can be turned off by pushing the button again for a
longer period.
AF
AF
AF
AF
17
3 Detailed instructions 3 Detailed instructions
S
te
p
1
Push AF
for approx. 3 sec.
to switch on,
again push for a
longer period
to switch off
S
te
p
1
Shortly
push DISP
Shortly push STEREO/MONO; pushing again
switches the setting - automatic storage is
made after some seconds
S
te
p
1
AF TP PTY
REG
AF TP PTY
REG
AST AF TP PTY
Bed.Anl. Werra1 englisch 09.04.1998 11:54 Uhr Seite 17