TechniSat DigiPal 2 - Manual (Page 22)

You can now enjoy the programme in full 5.1 channel Dolby
Digital sound. If you would like your receiver to recognise and
reproduce Dolby Digital broadcasts automatically, you should
set your receiver to automatic AC3 reproduction as described
in Point 6.3.6.
7.5 TV/Radio switching
The pre-programming setup contains not only television pro-
grammes, but radio programmes as well.
>
Press the TV/Radio key to switch the digital receiver
to radio mode.
The receiver will now play the radio programme last
selected.
> Press the TV/Radio key again to return to the televi-
sion programme last viewed.
7.6 Return to last programme selected
> Press Back on the remote control to return to the last
programme viewed previously.
> Press the key again to return to the programme vie-
wed previously.
7.7 Display time and programme information
This function allows you to view programme information rela-
ted to the current programme.
>
Press the Info key to display the information related
to the current programme (Fig. 7-8).
In the bottom half of the screen you will now see displayed
the current time, the name of the current channel and pro-
gramme, including the starting and ending time, where these
data are broadcast by the provider.
>
Where available, press the Info key again to display
information on the next programme.
7.8 Additional Programme information
Where available, the function Programme Information can be
used to obtain additional programme information on the pro-
gramme currently selected.
>
Press 2 x the Info key to open an additional informa-
tion window (Fig. 7-9).
More detailed information on the current programme
will be displayed.
> Lengthy text passages can be scrolled one line at a
time using the
arrow keys right/left.
> Press the Info function key again to display informa-
tion on the next programme.
22
(Fig. 7-8)
(Fig. 7-9)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 22