TechniSat DigiPal 2 - Manual (Page 26)

7.14.3 Viewing the Electronic Programme Guide
> Switch on both the digital receiver and your television
set.
> Press the SFI key on the remote control of your digital
receiver.
The electronic programme guide will now be displayed
on screen (Fig. 7-12). The programmes you have
selected, or which were listed as part of the default
setting, are shown here with their current programmes
being broadcast.You can now use the SFI function to
obtain information on the contents of various program-
mes. You can also use the SFI functions to select a
particular programme, to pre-select it for later viewing,
or to add it to the timer programming.
7.14.4 Now (Table of current programme contents)
The SFI table “ Now” (Fig. 7-12) listing current programmes
will be displayed first. The yellow bar to the right of the pro-
gramme name indicates the time elapsed of the current pro-
gramme. The programme currently being viewed is highligh-
ted.
>
Use the arrow keys up/down to move the marker
one line at a time. Use the arrow keys right/left to
move the marker one page at a time.
> The SFI functions (Point 7.14.7) are now available.
> Press the yellow function key to move to the SFI
table “ Next” (See Point 7.14.5)
or
>
Press the TV/Radio key to return to normal opera-
tion.
7.14.5 Next
> Use the yellow function key to display the table
" Next" (following programmes). (Fig. 7-13)
The SFI functions (Point 7.14.3) are available.
> Press the yellow function key to move to the SFI
table “ More” (Point 7.14.6)
or
>
Press green function key or Back key to return to
the previous SFI table “ Now”
or
>
Press the TV/Radio key to return to normal opera-
tion.
26
(Fig. 7-12)
(Fig. 7-13)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 26