TechniSat DigiPal 2 - Manual (Page 34)

> Confirm by pressing OK.
The appropriate Navigator will be displayed, allowing
you to work on the Favourites list (TV or radio list).
(Fig. 8-2)
The Favourites list will be displayed on the right half of
the screen. This is currently active, as the programme
currently selected is highlighted in blue. The alphabeti-
cally sorted Total list will be displayed on the left half of
the screen.
This Total list includes all available programmes.
> Press the red function key to move the marker to the
Total list. This is now active.
> Press the red function key again to open a selection
window. You are given the option of sorting the Total
list according to various selection criteria (e.g. all pro-
grammes, all free-to-air, all newly found, all English-
language programmes, etc.) or sorted by
Providers.
> Use the arrow keys up/down to select the prefer-
red programme listing (e.g. Total list).
> Confirm by pressing OK.
An additional selection window will be displayed.
(Fig. 8-3)
> Now use the arrow keys up/down to mark the
selection criterion according to which the Total list is to
be sorted. Select e.g.
All Programmes, to indicate
all available programmes in the Total list or All new,
to indicate only the newly found programmes of the
last programme search or
All English, to indicate
only English-language programmes.
> Confirm by pressing OK.
Depending on your selection, a programme list will now be
displayed showing, e.g., all, all new or all English-language
programmes. Programmes already included in the Favorites
list are indicated by a check-mark.
>
Press the red function key Programmes resp. the
green function key TV List can switch between the
Favourites list and the Total list. The currently active
list is indicated by a blue marker.
8.1.2 Adding programmes to the Favourites list
To accept programmes from the Total list into the Favourites
list, call up the Navigator as described in Point 8.1.1, and
switch to the Total list.
>
Press the blue function key Functions.
A selection window will be displayed, indicating the
available Navigator functions. (Fig. 8-4)
> Use the arrow keys up/down to mark the line
Add.
> Confirm by pressing OK.
34
(Fig. 8-2)
(Fig. 8-3)
(Fig. 8-4)
Bedanl DigiPal2_DigitMod T1engl 15.06.2005 16:33 Uhr Seite 34