Telenetics V.34-SDC - Manual (Page 153)

Configuration Quick Reference A-37
C
onfiguration
Qu
ic
k-
R
e
fe
ren
c
e
Performing Numeric Entry
The following options require you to enter information using the front panel or ACU.
The keystrokes to set the numeric entry for these options are as follows:
1) Step across the front panel menu by pressing until the option you want to
change displays.
2) Press . You are now ready to key in the numeric entry.
3) Press until the digit or character you want appears in the leftmost position
of the display.
Example: 1xxxxx
4) Press . The display shifts one position to the left, and the second character
position is displayed.
5) Repeat Steps 3 and 4 until you have completed keying in the numeric entry. To
re-enter a number or character, press to place the cursor at the beginning of
the line, then re-enter the number or character.
6) Press to save your selection.
Front Panel Option Description
Enter Phone #=n Stores phone number to phone book memory in location n.
Enter Then Dial Lets you dial from the front panel.
S-Reg xxx=nnn Lets you set S-Register xxx to nnn.
LPDA-2 Addr=nnn Lets you set the LPDA2 address.
Enter PW:nnnn Lets you unlock a modem’s password protection.
Old PW:nnnn Lets you enter old password.
New PW:nnnn Lets you configure new password.
Verify PW:nnnn Lets you verify new password.
Enter Group PW: Lets you verify group password.
NC Address:nnn Lets you set network control address.
New Address:nnn Lets you set remote modem’s leased line address.
Rmt Ser:nnnnnnn Lets you enter remote modem’s serial number.