Telenetics V.34-SDC - Manual (Page 179)

Country-Specific Information C-5
C
ountr
y
-Specif
ic
Inf
o
rmation
Restricted Features Summary
This section summarizes restricted features, by country, as follows:
• If an entry is blank, the feature is unrestricted.
• If an entry reads “Restricted,” the feature is not allowed.
• If the entry says that a feature is Always=x, the feature is enabled and cannot be
changed by the user. X is also the default option.
• If the entry shows front panel settings and AT command settings, only the listed
settings are allowed. (Settings not listed are restricted.)
In the following example, Answer can be set only to Manual (AT * AA0), Ring
#1 (AT * AA1), and Ring #2 (AT * AA2). Other settings are restricted.
NOTE: Refer to later sections in this appendix for information on using the
modem in the U. S. A.
Setting AT Command
Manual AT * AA0
Ring #1 AT * AA1
Ring #2 AT * AA2