Toshiba GA-1120 - Manual (Page 42)

2
2-20 Setting up Network Servers
T O PRINT TO THE GA-1120
• On a UNIX system running SunOS 4.x or other BSD-based variant, use the lpr command
to send a job to the GA-1120.
• On a UNIX system running Solaris 2.x or any System V implementation of UNIX, use
the lp command to send a job to the GA-1120.
• Windows NT 4.0/2000/XP users with the TCP/IP protocol loaded can send print jobs to
the GA-1120 from their applications or from a command prompt.
When Windows NT 4.0/2000/XP users print from applications, they can set print
options with the driver but not from the UNIX command line.
Managing print jobs
UNIX network administrators can use UNIX utilities for viewing the list of jobs, and
for printing and removing jobs that are spooled on UNIX servers. If the network
includes a Windows NT 4.0/2000/XP workstation that has TCP/IP protocols loaded,
you can use Command WorkStation or Fiery Downloader to download fonts and files.
You can also use the job management tools to manage jobs from remote workstations.
For more information, see the
Job Management Guide .
Even without the Fiery utilities, you can:
• Set up the GA-1120 to print a log of printed jobs automatically after every 55 jobs
(see Job Log Setup on page 4-44 ).
• Print a Job Log manually at any time from the Command WorkStation Functions
menu (see the Job Management Guide ).