Toshiba GA-1120 - Manual (Page 64)

4
4-12 Performing Setup from the Control Panel
Clear Each Scan Job
After 1 day/Now/Manually/After 1 week [After 1 day]
Specify how you want to remove scanned data from the HDD. If you select Manually,
the scanned data remains on the HDD until specifically deleted, or until all scanned
jobs are cleared by the Administrator.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.
Network Setup options
Network Setup configures the GA-1120 to receive print jobs over the network systems
that are used at your site.
If the GA-1120 is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job.
In the Setup menu, choose Network Setup, where you specify network addresses and
names to be used by workstations, servers, and the GA-1120 when they communicate
with each other.
The Network Setup menu includes three submenus that allow you to choose port
types, protocols, and network services. You must perform Port Setup and enable at
least one port.
For each item you enable, you are prompted to enter settings for that item. Default
values, where applicable, appear in this manual with square brackets.
You should display and select options only for the network systems that are currently
used at your site. If your network requirements change, you can change Network
Setup at any time.