Toshiba GA-1120 - Manual (Page 74)

4
4-22 Performing Setup from the Control Panel
Select NDS Tree
List of trees
Use the Up and Down arrow buttons to browse the list of NDS trees available to the
GA-1120. Choose Set when you have displayed the tree that contains the Printer, Print
Server, and Print Queue objects you previously defined for the GA-1120.
Your new NDS tree selection automatically overwrites any previous tree selection.
If you change the NDS tree selection and there are also current Bindery settings, you
are alerted that they will be deleted. If you continue with NDS Setup, you can replace
Bindery settings later. If you do not want to continue, press the Menu button to exit
NDS Setup.
Network Setup
Service Setup
PServer Setup
NDS Setup
Before entering NDS settings, make sure the GA-1120 is connected to the network
and that you have configured an NDS directory tree with a Printer, Print Server,
and one or more Print Queue objects for GA-1120 jobs (see
page 2-13 ). To perform
NDS Setup, you may need permission to browse the NDS tree. If access to the
Print Server is restricted, you need a login password.
The main objective of NDS Setup is to specify the Print Server object. In addition,
you can indicate the location of the GA-1120 print queues.
N OTE : The terms NetWare server, Novell server, and IPX server are in common use
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Enable NDS
Yes/No [No]
Select Yes if the NetWare servers you will use to print to the GA-1120 are running
NetWare 4.x/5.x in native mode.