Toshiba GA-1120 - Manual (Page 67)

4
4-15 Network Setup options
Port Setup options
Protocol Setup options
Network Setup
Port Setup
Ethernet Setup
Enable Ethernet
Yes/No [Yes]
Select Yes if you have Ethernet cabling connected to the GA-1120.
Ethernet Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed or if you do not know the
network speed. If you know the speed of the network to which the GA-1120 is
attached (10 Mbps or 100 Mbps), select it.
To configure the GA-1120, choose each protocol and enter the settings for that
protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communication
simultaneously.
Network Setup
Protocol Setup
AppleTalk Setup
Enable AppleTalk
Yes/No [Yes]
Select Yes if you have an AppleTalk network connected to the GA-1120. This
setting enables the GA-1120 to communicate over AppleTalk networks.