TRENDnet TDM-E400 - Manual (Page 13)

13
About this User’s Manual
This User’s Manual shows you how to set up the Ethernet Modem Router and how
to customize its configuration to meet the needs of your network and Internet
connection type.
This document is organized in five major parts, each containing several chapters:
f Part 1, “Getting Started,” describes the product features, provides quick start
setup instructions, and explains basic configuration information you will need to
begin using the Ethernet Modem Router.
Read the chapters in Part 1 before attempting to use or configure the device.
Depending on your LAN and Internet connection requirements, no additional
configuration may be needed before you begin using the device.
f Part 2, “Interfaces and Operating Modes,” describes the available operating
modes and how to configure them. Part 2 also provides detailed configuration
instructions for each of the Ethernet Modem Router’s interfaces. These instructions
will be particular use when your network or Internet connection requirements differ
from those reflected in the default product settings.
f Part 3, “Routing and IP-Related Features,” provides configuration
instructions and detailed information on using the Ethernet Modem Router’s
routing features, such as DHCP server, DNS relay, and IP routes.
f Part 4, “Security Features,” describes how to configure Network Address
Translation (NAT) and the embedded firewall, and how to create your own data
filters.
f Part 5, “Administrative Tasks and System Monitoring,” provides
instructions for network and system administrators on controlling access to the
Ethernet Modem Router’s configuration software, viewing system performance
statistics, diagnosing problems, upgrading the system software, managing the
configuration, and configuring special features.
The document’s appendices explain basic Internet and networking concepts and
provide solutions to common troubleshooting issues. A glossary and an index are
provided for your reference.