TRENDnet TDM-E400 - Manual (Page 63)

Chapter 5. Configuring the WAN Interfaces
63
Field Description
Default Route Indicates whether the ADSL2+ Ethernet Modem
Router should use the IP address assigned to this
connection as its default route. Can be Enabled or
Disabled. See Chapter 10 for an explanation of
default routes.
Use DHCP When set to Enable, the device will acquire additional
IP information from the ISP's DHCP server. The PPP
connection itself acquires the device's IP address,
mask, DNS address, and default gateway address.
With Use DHCP enabled, the device will acquire IP
addresses for various other server types (WINS,
SMTP, POP3, etc. – these server types are listed on
the DHCP Server Configuration page in the LAN tab).
Use DNS When set to Enable, the DNS address learned
through the PPP connection will be distributed to
clients of the device's DHCP server. This option is
useful only when the ADSL/ADSL2+ Ethernet Modem
Router is configured to act as a DHCP server for your
LAN. When set to Disable, LAN hosts will use the
DNS address(es) specified in the DHCP pool (see
“Configuring DHCP Server” on page 95) and
specified in the DNS configuration (see Chapter 9).
Oper. Status Indicates whether the link is currently up or down or if
a specific type of data exchange is under way (e.g.,
password authorization or DHCP).
Actions You can use these icons to modify ( ), delete ( ),
and view additional details on ( ) the PPP interface.
Not all settings are available on the PPP Interface -
Modify page. To modify the other settings, you must
delete the interface and create a new one. Be sure to
submit and commit your changes if you make
modifications.