TRENDnet TDM-E400 - Manual (Page 2)

TDM-E400 / TDM-C400 ADSL Modem Router User’s Manual
2
Important Rules for Safe Operation
In addition to the careful attention devoted to quality standards on the manufacture of your ADSL2+
Ethernet Modem Router, safety is a major factor in the design of every product. However, safety is
your responsibility, too. This section lists important information that will help assure your enjoyment
and proper use of the ADSL2+ Ethernet Modem Router and accessory equipment. Please read them
carefully before operation and using your Router.
z Read and Follow Instructions – you should read all the safety and operating instructions
before operating the Router.
z Retain Instructions – You should save all the safety and operating instructions, for your
future reference.
z Heed Warning – Comply with all warnings on the products and in the operating instructions.
z Check Power Sources – Operate this product only from the type of power source indicated
on the product’s marking label. If you are not sure of the type of power supplied to your
home, consult your dealer or local power company.
z Be Careful of Overloading – Do not overload wall outlets or extension cords, as this can
result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power
cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may
result in a shock or fire hazard. Periodically examine the cord, and if its appearance indicates
damage or deteriorated insulation, have it replaced by your service technician.
z Protect Power Cords – Route power supply cords so that they are not likely to be walked on
or pinched by items placed upon or against them. Pay particular attention to cords where
they are attached to plugs and convenience receptacles, and examine the point where they
exit from the product.
z Check Ventilation – Slots and openings in the enclosure are provided for ventilation to
ensure reliable operation of the product and to protect it from overheating. Do not block or
cover these openings. Never block these openings by placing the product on a bed, sofa,
rug, or other similar surface. Never place this product near or over a radiator or heat register,
or any other heat source (including amplifiers). Do not place this product in a built-in
installation, such as a bookcase or equipment rack, unless you provide proper ventilation.
z Do Not Use Accessories – Do not use attachments, unless they are recommended by your
vendor, as they may cause electrical or fire hazards.
z Use the Recommended Power Adaptor – You must use the Power Adaptor that comes
with your ADSL2+ Ethernet Modem Router.
z Do Not Use Near Water – Do not use this product near water. For example, near a
swimming pool, bath tub, wash bowl, and the like.
z Do Not place Near High Temperature Source – For example near a steamer, kitchen
range fire, and the like.
z Use Caution in Mounting This Product – Do not place this product on an unstable surface
or support. The product may fall, causing serious injury to a child or adult, as well as serious
damage to the product.
z Use Care in Moving Product-and-Cart Combinations – Quick stops, excessive, force and
uneven surfaces may cause the product-and-cart combination to overturn.
z Unplug Power Before Cleaning – Do not use liquid cleaner or aerosol cleaner. Use a damp
cloth for cleaning.