TRENDnet TDM-E400 - Manual (Page 90)

TDM-E400 / TDM-C400 ADSL2+ Ethernet Modem Router User’s Manual
90
About Part 3
Part 3 explains how to view information relating to Internet Protocol
processing, and describes configuring the Ethernet Modem
Router’s IP routing features.
Part 3 contains the following chapters:
f Chapter 7, “Viewing System IP Addresses and IP
Performance Statistics,” shows how to view the IP
information associated with the device interfaces and
statistics related to IP packet processing.
f Chapter 8, “Configuring Dynamic Host Configuration
Protocol,” describes how to configure the Ethernet
Modem Router’s DHCP server and DHCP relay agent to
dynamically assign IP information to your LAN PCs.
f Chapter 9, “Configuring DNS Server Addresses,”
describes how to specify the IP addresses for the Domain
Name Servers that your LAN will use when accessing the
Internet.
f Chapter 10, “Configuring IP Routes,” describes how to
create rules that specify the device interfaces through
which data packets should be forwarded, based on their
destination IP addresses.
f Chapter 11, “Configuring the Routing Information
Protocol,” explains how to configure a protocol that
enables the Ethernet Modem Router to share its routing
information with other routers on your LAN or the Internet.