TRENDnet TDM-E400 - Manual (Page 30)

TDM-E400 / TDM-C400 ADSL2+ Modem Router User’s Manual
30
Figure 5. USB Setup Wizard—Prompt for Hardware Plug In
6. Connect the USB cable to the ADSL2+ Ethernet Modem
Router and to your computer.
The provided USB cable provided has a flat connector on one
end (called Type A) and a square connector on the other (Type
B). Connect the flat connector to your PC and the square
connector to the Ethernet Modem Router . See Figure 6.
To ADSL-
Ethernet router To PC
Figure 6. USB Cable Connectors
If a Microsoft digital signature dialog box again displays, click
to continue.
A window displays briefly, indicating that the system has found
new hardware, and the Finished page displays to complete the
installation:
Figure 7. DSL Modem Setup Wizard—Finished Page
7. Click .
You are now finished installing the driver. You do not need to restart
your computer. Proceed to USB Driver Installation Part 2 to
configure IP properties on the USB PC.