TANDBERG MXP - Manual (Page 126)

TANDBERG Maestro MXP
126
4.1.2 System Name
System Name identifies the system:
ƒ On the welcome page.
ƒ During an MCU conference call.
ƒ When using the Web-interface.
ƒ When the codec is acting as an SNMP Agent.
ƒ Towards a DHCP server.
ƒ H323 ID. Other systems can call in using this name instead of IP-number/IP-address.
System Name is blank by default. System name can be alphanumeric and up to 50 characters
long. Follow the installation procedure to enter a System Name.
Note that if the system name contains Asian and non-Latin character text input, the
International Name using Latin characters only, must be specified as well.