Tandberg 3000 mxp profile – TANDBERG MXP User Manual
Page 250
TANDBERG Maestro MXP
250
The DNAM Loudspeaker Cabinet (Center Speakers)*:
3-way Center Speaker system
Frequency range 50Hz - 20kHz
2 x 130mm low- and midrange loudspeakers, 8 ohms nominal, high quality
1 x 25mm dome tweeter, 6 ohms nominal, high quality
Crossover filtered audio signals received from DNAM amplifier
Long time max power 90 Watt on all loudspeakers
Enclosed MDF speaker cabinet
Integrated Stereo Speakers**:
2 * 15W Stereo Speakers, high quality
Frequency range 100Hz - 20kHz
Enclosed MDF speaker cabinet
Using the external and optional Stereo Speaker Kit will improve the stereo sound, even on
systems with integrated stereo speakers**. Note that the kit is not available for Mini-DNAM
described below. Before connecting the Stereo Speaker Kit, make sure the complete
videoconferencing system is powered down. When connecting the Stereo Speaker Kit to a
system with already integrated stereo speakers, these integrated speakers will be disabled, and a
new filter and specification setup is loaded when powering up the videoconferencing system.
Please refer to the section
Stereo Speaker Kit
for details.
TANDBERG 3000 MXP Profile:
The TANDBERG Mini-DNAM*:
The Mini-DNAM audiosystem is built on two specially designed and separate modules; the Mini-
DNAM amplifier and the Mini-DNAM loudspeaker cabinet. The Mini-DNAM loudspeaker cabinet is
stereo-configured and based on two versions made for fitting both the TANDBERG 3000 Profile
43’’ and 32’’ systems. The compact sized amplifier is mounted in the rear of the speaker cabinet.
The Mini-DNAM amplifier*:
The Mini-DNAM amplifier specification:
Stereo digital SPDIF input
2x30W into 8ohm
External DC power supply
Compact
size