TANDBERG MXP - Manual (Page 35)

General Use
35
The remote control (TRC 4)**:
1. Change video source. If
possible, you will start open a
Dual Stream. Press the video
source button again to stop
the dual stream.
2. Mic Off turns your microphone
on and off, see Mic off .
3. Arrow keys are used for
navigation in the menu and for
moving the camera* when the
menu is hidden, see
Navigation .
4. Volume + and – adjusts the
Codec volume only and not
the monitor's volume, see
Volume + and - .
5. The Layout key toggles
between full screen and
different display layouts, see
Layout .
6. Cancel takes you back one
step in the menu system. Use
Cancel to delete characters in
an input field, see
Navigation .
Press and hold the Cancel
key for 1 second to close the
menu.
7. Press the Call key to place a
call, see Make a Call .
8. Number/Letter keys function
in the same manner as with a
mobile or cellular phone, see
Number and Letter keys .
Camera presets define
specific camera positions.
Move the camera to the
desired position and press
and hold a number key for 1
second to save the current
camera position to that
number key. To activate a
preset whilst in a call, simply
press and release that
number key, see
Camera
Presets .
9. Press Preset + a number to
activate a preset.
10. Press the Services button to
open the Services menu.
11. The Presentation key
switches to a predefined