TOA Electronics EX-16 - Manual (Page 9)

2.2 Stations
2.2.1 Features
The stations used in the Toa Intercom EX-16 have the following features:
1. Each station is provided with a male 4-pin plug (YC-102) for easy con-
nection to cables.
2. Wiring from the exchange to each station is an independent 4-wire
system. The fact that only 4 wires are necessary makes installation
easier, and with a 4-pin jack (YC-101 or YC-103) at the end of each
cable, connection can be made quickly with only a screwdriver.
There are three types of stations available: the desk-top type, the
flush-mounting type and the desk/wall type. Each type is available in 2
models (master and substation) and can be chosen in accordance with
requirements.
2.2.2 Specifications
Stations are available in the following three models.
Desk
Type
with
Handset
Flush Mount
Type
with
Handset
Desk/Wall
Type
without
Handset
Master Station HFM-500 HFM-510 HFM-100
Substation HFS-500 HFS-510 HFS-100
Optional Accessories:
Master Station:
Sub Station:
YC-100 Wall mounting panel for HFM-100 and
HFS-100.
YC-510 Back box for HFM-510 and HFS-510.
Capable of calling any master/substation in
the system, and also of using all available
functions.
Capable of calling only its Master Station, and
also of using the privacy, single digit dialing
press-to-talk and BGM selection functions.
Function
Model Type
7