TROY Group EtherWind 802.11b - Manual (Page 17)

Installing the Software
Follow these steps to install the WP-Admin software and configure the print server.
1. Insert the EtherWind Wireless Configuration CD-ROM into your PC or
Macintosh.
Note:
There is also a Linux version of the WP-Admin utility available on the TROY
website (www.troygroup.com).
2. If you are using a Windows computer, click on Install TROY EtherWind
Utilities , then click on Install EtherWind Configuration Utilities and
Printing Software . If you are using a Macintosh computer, open the Mac
folder (for Mac OS 8.x or 9.x) or the Mac OS X folder.
Note:
If you are using Windows and don’t have the Java Runtime installed on your
system, you will be prompted to install it, click Continue.
3. Follow the on-screen instructions for installing the utility. When WP-Admin
starts, you will see the WP-Admin Wireless Server Search screen, which
will look like this:
4. Click START to begin searching for print servers. WP-Admin will get the
information from the print server(s) and list the Server Name and Ethernet
Address (which should correspond with the label on the back of the print serv-
er). It might take a minute or two for the print server to show up, especially if
you have a large wireless network. Note that by default the name of the
EtherWind print server is XCD_xxxxxx, where xxxxxx is the last six digits of
the Ethernet (MAC) address (for example, XCD_08B2C7).
2-3