TROY Group EtherWind 802.11b - Manual (Page 30)

2. Click Start , select Programs , select the XAdmin32 folder, and then select
XAdmin32.
3. Click on the IPX/SPX icon under Filters to set the operating mode to
IPX/SPX (TCP/IP mode will not allow you to configure NetWare print
queues directly). The EtherWind should appear in the list of available printers.
If it does not, try selecting
Devices from the menu bar and then Search
Active Devices .
4. Double click the printer you want to configure, enter the configuration pass-
word ( ACCESS is the default), and click OK .
5. A series of index card tabs will be displayed. Click on the NetWare P1 tab.
6. If it is not already selected, select Queue Server as the operating mode.
7. Click on the inverted triangle button and select the NDS tree.
8. Click the Change... button to select the NDS context where the queue will
reside. (If you are using the Microsoft client, you must type in the name of the
context.)
The box labeled "Print Server" contains the name of the NetWare Print Server. If
you are configuring any other port, this box contains the name of the NDS
Printer. If desired, you can change these names.
You may now create a print queue. Follow these steps:
1. Click on the Change NDS Queues... button to configure an NDS print
queue or click the Change Bindery Queues... to configure a bindery mode
queue.
2. Two windows will appear: Available Print Queues and Serviced Print
Queues . Go to the Available Print Queues window.
3. If you are configuring an NDS queue, click on the context where the print
queue will reside.
4. If you are configuring a bindery queue, click on the volume where the queue
will reside (a volume name will have a file server icon next to it).
6-2