TROY Group EtherWind 802.11b - Manual (Page 52)

2. Right-Click on the print server to be upgraded in the list, and select Load
Firmware.
3. If you are using TCP/IP to upgrade, select TFTP PUT from this host . If you
are upgrading using IPX/SPX on a NetWare network to upgrade, select
Netware GET from a server (If you are using Netware to upgrade, you
need to put the .bin firmware file in the LOGIN directory of the Netware
server). Click
OK .
4. If you selected TFTP PUT from this host in step 3, enter the configuration
password (default is ACCESS ) and click Browse to find the .bin firmware
11-6