TRENDnet TV-IP100 - Manual (Page 12)

22
7
S
ECURITY
To ensure the highest security and prevent unauthorized usage of
the Internet Camera the Administrator has the exclusive privilege
to access the System Administration for settings and control
requirements to allow users the level of entry and authorize the
privileges for all users. The Internet Camera supports multi-level
password protection and access to the Internet Camera is strictly
restricted to define the user who has a "User Name" and "User
Password" that is assigned by the Administrator.
Administrator can release a public user name and password so
when remote users access the Internet Camera they will have the
right to view the image transmitted by the Internet Camera.
Note:
Since the default settings are Null String, it is highly
recommended to set the "Admin ID" and "Admin Password"
when you are the first time to use the Internet Camera. Once the
ID and Password are defined, only the administrator has the
access to management the Internet Camera. This procedure
should be done as soon as possible since the security features with
the Internet Camera will not be enabled until the "Admin ID" and
"Admin Password" is defined.
23
8
S
OFTWARE
I
NSTALLATION
This section describes the Software installation procedure of the
Internet Camera for Web Configuration and IPView SE
application.
Web Configuration
The Internet Camera must be configured through its built-in Web-
based Configuration.
Extensive knowledge of LAN will be helpful in setting up the
Internet Camera
From the web browser, enter the default IP address to access the
Welcome screen of the Internet Camera. To configure your
Internet Camera, type http://192.168.0.20 in the address box. The