TRENDnet TV-IP100 - Manual (Page 20)

38
Protocol:
Two options of NTP or Time are available for your selection to
link with the Time Server. The default setting is NTP.
TimeZone:
The system administrator must select the time zone for the region.
Please refer to the appendix for the time zone selection table.
To set the Date Time manually, select “Set Manually” and the
system administrator must enter the Date and Time in the
respective field manually.
Note:
When you select Set Manually, every time when the Internet
Camera is powered off and on, you must re-enter the details once
again due to time lost.
Save/Cancel:
After making sure all settings in the DateTime are correct, click
the “Save” button to store the settings for the Internet Camera.
You can alternatively click the “Cancel” button to restore all
settings to the values last saved to or retrieved from the Internet
Camera.
39
System Administration – Upload
The Upload menu contains the commands for FTP server, time
schedule and manual operation settings.
Click “Upload” in the system administration menu bar, and the
Upload screen will appear as below:
Click “Home” to
return to Home Screen