TRENDnet TV-IP100 - Manual (Page 16)

30
DNS IP Address:
DNS (Domain Name System) server is an Internet service that
translates domain names into IP addresses. Enter at least one
DNS IP Address.
Dynamic DNS:
The Dynamic DNS service allows you to alias a dynamic IP
address to a static hostname in any of the domains, allowing your
computer to be more easily accessed from various locations on
the Internet.
LED Control:
The LED control allows user to setup the LED illumination as
desired. This feature provides the flexibility when surveillance
activity is ON.
There are three options as follows:
z Normal –
Power - Steady On of the LED indicator.
Link - Steady On of the LED indicator. When
LAN activity is present the LED indicator will
flash steadily.
z OFF –
Power - LED indicator is off
Link – LED indicator is off
z Dummy –
Power - Steady On of the LED indicator.
Link - Steady On of the LED indicator with
random flashing.
31
The default setting for the LED control is at Normal. When you
have configured the LED control, the correct illumination will be
set after 1 minute.
Note:
This function is built-in to the LED indicators to add extra
capabilities. The three options allow the Administrator to
configure and camouflage the illumination for the LED indicator
to falsify the monitoring status. In Normal Mode, the LED
indicator functions normally. Under Off Mode, the LED
indicators are both off; however, it is still monitoring the activity.
In Dummy Mode, the LED indicators operate in monitoring
condition but monitoring activity is off or on.
Loading ActiveX From:
This field is used to specify the location of Xplug Control
(ActiveX) plug-in program. Enter the information as required
in .ocx format, for example:
http://www.<your company>.com/xplug.ocx, where <your
company> must be replaced with your company’s DNS server.
Or it can be installed from the CD come with the internet camera.
Open Second Port:
The Web Server field allows settings to open a second port for the
Internet Camera. This will permit users IP Sharing Gateways to
support multiple Internet Cameras. By default, Port 80 is always
opened for the Internet Camera Web Server access. Select “Yes”
and input the second port value.
For example: If you have 5 Internet Camera to be installed, each
with an IP address from
192.168.0.101
192.168.0.102