TRENDnet TV-IP100 - Manual (Page 33)

64
You must select the camera and click the “Add” button to add a
new camera.
You can select the “Input IP” button, an Input IP dialog box
will appear as illustrated below.
Enter the IP Address of the camera in the specified field and click
the “Add” icon to add a new camera.
Note:
1. If you want to add a camera through the Internet, you must key
in a physical IP Address.
2. When the camera is installed behind Gateway and the Open
Second Port of camera/Port Forwarding of Gateway function is
enabled, the Gateway IP address has to be entered with the Port
Number as below:
65
3. At the same time, the Gateway IP address can be replaced by
URL as below:
4. If you forget the IP Address that you want to add, a dialog box
will appear to notify you of the error.
If you are unsure of the IP Address of the camera, you can click
the “Browse” button, the Browse Camera dialog box will appear
with a blank screen as illustrated below.