TRENDnet TV-IP100 - Manual (Page 18)

34
Frame Rate:
Select the frame rate desired with default setting at Auto for
optimal frame rate.
Brightness Control:
Adjust the brightness level with default setting at 64.
Contrast Control:
Adjust the contrast level with default setting at 64.
Saturation Control:
Adjust the saturation with default setting at 64.
Light Frequency:
Adjust the light frequency to suit your area of operation from the
options either 50 Hz or 60 Hz (default).
Note:
50 Hz and 60 Hz variants are available to accommodate the
different light frequency found in USA (60 Hz) and Europe (50
Hz) for the Internet Camera to ensure better image quality.
Save/Cancel:
After making sure all settings in the Image are correct, click the
“Save” button to store the settings for the Internet Camera. You
can alternatively click the “Cancel” button to restore all settings
to the values last saved to or retrieved from the Internet Camera.
35
System Administration - Users
The User options menu contains commands to allow the system
administrator to assign legal users who are permitted to monitor
the Internet Camera from the remote site.
Click “Users” in the system administration menu bar and the
Users screen will appear as illustrated below:
Add User:
User Name:
Enter the user name in this field.
A maximum of 64 users names are allowed, however each users
name must be different. Each user name can be used as a group
given the password for example, if the User Name is “Guest” and
the User Password is “Guest” anyone can access the Internet
Camera with these details used as a group of users under the User
Name Guest. The maximum length for the User Name is 12
(Printable ASCII).
User Password:
Enter the user’s password assigned by the administrator. The
maximum password length is 8 (Printable ASCII).
Click “Home” to
return to Welcome
Screen