Perreaux SILHOUETTE SXV1 - Manual (Page 11)

11
4 4 Customising Your SXV1
The Perreaux SXV1 gives you complete access to all cartridge-
loading parameters for each channel via the 12-way rear mounted
DIP switches.
Two DIP switches are required, as Perreaux engineers have
meticulously laid the internal circuitry out on the internal PCB
maintaining maximum isolation between channels. Each DIP
switch should be set to be a mirror of the other.
Cartridge load settings should be set up to directly correspond to
the cartridge manufacturers recommended loading figure. If you
don’t know the recommended loading of your cartridge, please
contact the cartridge manufacturer or your dealer for this
information.
It is recommended that you make adjustments to the settings
using a pen or other similar pointed object.
Impedance loading values are set using switches 1 through 5.
Capacitive loading values are set using switches 6 through 9.
Gain values are set using switches 10 through 12.
Caution! NEVER change the DIP switch settings of your SXV1 whilst
it is turned on.
Note: Each DIP switch should be set to be a mirror image of the
other channel.