Perreaux SILHOUETTE SXV1 - Manual (Page 27)

27
Input Overload Margin...............................................................18dB
The amount of headroom available over and above the Rated
Output.
RIAA Accuracy................................................±0.5dB, 20Hz–20kHz
This figure indicates how accurately the RIAA Equalisation
circuitry follows the RIAA specification across the frequency
range 20Hz to 20kHz. From 100Hz to 20kHz, the RIAA
accuracy of the SXV1 is as low as ±0.2dB.
Output Impedance.........................................................................47 Ω
Output Impedance indicates the ability of the unit to drive the
Line Level Output. The low impedance of the SXV1 means that
it will drive any combination of cable configuration (length,
capacitance, etc.) and component impedance with ease whilst
maintaining signal integrity.
Rated Output........................................................................... 0.75V
RMS
This is the optimum operating level of the unit, offering the best
performance whilst allowing a large enough buffer to
accommodate the unpredictable nature of music. It is the
reference output level to which other specifications, such as
sensitivity and gain, are referred. The Rated Output does not
indicate the full capability of the SXV1.
Maximum Output ................................................ 6.0V
RMS
(17.0V
p-p
)
The maximum output level possible before the onset of clipping.
This figure indicates the extent of the dynamic range available
from the SXV1.
Wideband Frequency Response......................... 5Hz to 100kHz
Describes the frequency range at which the output signal remains
audible.
Operating Class.......................................................................... Class A
The driver circuitry and amplification stages all operate in Class
A, providing the best possible THD+N and Signal to Noise Ratio
specifications.