Perreaux SILHOUETTE SXV1 - Manual (Page 7)

7
2 2 Instant Install
If you are like us, the first thing you will want to do is to play
your favourite piece of music through your new SXV1. The
following instructions are written to enable you to achieve this as
quickly as possible. These are not comprehensive instructions,
but are designed to enable you to play music now!
Note: Please take the time to read the SXV1 manual thoroughly
as it incorporates many features, which will enhance its
operation.
Placement
The SXV1 is a highly sensitive preamplifier and best results will
be achieved when placed away from potential interference from
other components and electrical devices, for example AC mains
cords/outlets, transformers, high power amplifiers, computers,
etc.
Place the SXV1 close or near the turntable in order to make as
short a connection as possible between the tone arm and
preamplifier.
Turn off associated components
This minimises the potential to damage any other components
when connecting your SXV1 into the system.
Connect turntable to SXV1
Connect the audio output from the turntable to the inputs at the
rear of the SXV1. Also, connect the turntable earth terminal to
the earth post on the SXV1. Refer to Chapter 3 for Rear Panel
information.
Connect SXV1 to preamplifier
Connect the line level output of the SXV1 to one of your
preamplifier inputs. Refer to Chapter 3 for Rear Panel
information.
Configure SXV1 cartridge settings
Set the DIP switches on the SXV1 to correspond with the
manufacturers specifications of your particular cartridge. Refer
to Chapter 4 for setup information.