Perreaux SILHOUETTE SXV1 - Manual (Page 6)

6
1 1 Unpacking and Placement
Unpacking
Procedure
The SXV1 is packaged for maximum protection. To open, sit the
box upright and cut the reinforced tape at the top of the box. The
product can now be removed.
Pull the white polystyrene protectors off either side of the unit
and remove the black material covering.
The SXV1 Phono amplifier is now unpacked and ready for
further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x SXV1 Phono Preamplifier
1 x Product manual
1 x Detachable AC power cord
Placing Your
SXV1
The SXV1 should generally be placed close to your source
equipment, thus keeping the interconnect cabling between the
tone arm and phono stage as short as practical. This will reduce
the systems susceptibility to radio frequency interference and the
negative effects associated with long cables.
Ventilation
Requirements
The SXV1 is a low power preamplifier. Ventilation requirements
are not considered to be an important factor in product
placement.
In the event that the SXV1 is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Specifications section of the manual (Chapter 11).