Perreaux SILHOUETTE SXV1 - Manual (Page 13)

13
Capacitance
Loading
Table
Use this table to match the capacitance loading characteristics of
your SXV1 to that recommended by your cartridge manufacturer,
where switch in UP position is OFF and switch in DOWN
position is ON. Consult your cartridge documentation for the
correct capacitance figure.
C Load Dip Switch Setting
(pF) 6 7 8 9
27 UP UP UP UP
54 DOWN UP UP UP
74 UP DOWN UP UP
101 DOWN DOWN UP UP
297 UP UP DOWN UP
324 DOWN UP DOWN UP
344 UP DOWN DOWN UP
371 DOWN DOWN DOWN UP
417 UP UP UP DOWN
444 DOWN UP UP DOWN
464 UP DOWN UP DOWN
491 DOWN DOWN UP DOWN
687 UP UP DOWN DOWN
714 DOWN UP DOWN DOWN
734 UP DOWN DOWN DOWN
761 DOWN DOWN DOWN DOWN
Gain Setting
Table
Use this table to configure the gain characteristics of your SXV1
to suit the output voltage of the cartridge you are using, where
switch in UP position is OFF and switch in DOWN position is
ON.
Consult your cartridge documentation for it’s rated output
voltage. Set the gain configuration where the “Sensitivity” of
your SXV1 is within ±25% of your cartridge output voltage. If
no configuration falls into this bracket, use the setting with the
sensitivity higher than your cartridge output voltage.
Gain Sensitivity S/N Ratio THD+N Dip Switch Setting
(dB) (mV) (dB) (%) 10 11 12
40 7.57 81.9 0.010 UP UP UP
50 2.36 74.6 0.022 DOWN UP UP
59 0.81 64.0 0.058 UP DOWN UP
61 0.66 62.6 0.067 DOWN DOWN UP
70 0.23 55.4 0.122 UP UP DOWN
71 0.22 55.1 0.188 DOWN UP DOWN
72 0.18 54.6 0.199 UP DOWN DOWN
73 0.17 53.4 0.203 DOWN DOWN DOWN