Trane PKGP-PRC001-EN - Manual (Page 17)

PKGP-PRC001-EN 17
(12½ Ton)
Performance
Data
Table PD-6 — Evaporator Fan Performance — 12½ Ton — WC*150B
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3 HP Standard Motor & Field Supplied Low Static Drive (1) 3 HP Standard Motor & Drive
4000 — — 506 0.69 537 0.80 568 0.92 599 1.03 631 1.15 662 1.26 694 1.37 726 1.48 756 1.59
4500 511 0.87 541 0.98 572 1.09 603 1.21 634 1.32 664 1.43 693 1.55 721 1.68 749 1.81 777 1.94
5000 551 1.16 580 1.31 612 1.39 640 1.51 672 1.67 700 1.78 727 1.90 754 2.03 779 2.18 805 2.32
5500 597 1.54 626 1.68 656 1.80 682 1.89 709 2.04 738 2.22 763 2.34 788 2.46 813 2.60 837 2.76
6000 644 1.99 674 2.10 699 2.28 727 2.37 749 2.48 774 2.66 801 2.85 825 3.00 848 3.13 871 3.27
3 HP Standard Motor & High
Static Drive Accessory
Notes:
Fan motor heat (MBH) = 3.15 x Fan BHP.
Data includes pressure drop due to wet coils and filters.
No accessories or options are included in pressure drop data.
Refer to Table PD-13 to determine add’l static pressure drop due to other options/accessories.
Notes:
1. Field supplied fan sheave BK115 required. Field supplied belt may be necessary.
Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions, Using
the full horsepower range of our fan motors as shown in our tabulated data will not result in nuisance tripping or premature motor failure. Our product's warranty will not be affected.
Table PD-6 — Evaporator Fan Performance — 12½ Ton — WC*150B — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3 HP Standard Motor & Drive 3 HP Standard Motor & High Static Drive Accessory
4000 786 1.70 815 1.82 843 1.94 870 2.06 897 2.20 923 2.34 949 2.48 974 2.64 998 2.80 1022 2.96
4500 806 2.06 833 2.18 860 2.30 886 2.43 912 2.56 937 2.69 962 2.83 986 2.98 1010 3.13 1033 3.28
5000 830 2.47 855 2.61 880 2.74 905 2.88 930 3.01 954 3.15 978 3.29 1001 3.43 1024 3.58 1047 3.73
5500 860 2.92 883 3.08 906 3.24 929 3.39 952 3.54 975 3.69 997 3.84 1020 3.99 1042 4.14 1064 4.29
6000 893 3.43 915 3.59 936 3.77 957 3.94 978 4.12 999 4.29 1020 4.46 1041 4.62 1062 4.78 1083 4.94
5 HP Oversized Motor & Drive