Perreaux Silhouette SXCD - Manual (Page 15)

14
The SXCD is designed to function with the standard CD player
RC-5 remote control codes. For more information about the
standard RC-5 remote control codes for CD players please visit
www.perreaux.com/files/sxcd-rc5-codes.pdf on the Perreaux
website.
External IR Receiver
Alternately, by using an external infrared (IR) receiver,
commands can be received from a universal or programmable
remote control which uses the standard CD player RC-5 remote
codes.
The stereo 3.5mm plug of the infrared (IR) receiver must follow
the specifications as per the diagram below:
Sleeve: Ground (GND)
Ring: +ve
Tip: Signal
More information about the infrared (IR) receiver can be
obtained from your Perreaux dealer or found on the Perreaux
website at www.perreaux.com/files/sxcd-ir-receiver.pdf.
Serial Number/Voltage Label
The serial number is unique to your SXCD. Please record this
number and store it in a safe place. For any service related
enquiry, please be prepared to quote the product serial number to
Perreaux personnel or their service representative.
The voltage displayed in this area is the ONLY voltage that can
be accepted by the unit.
Caution! Never attempt to connect the unit to the incorrect voltage.
AC Mains Input
An IEC-standard mains input is provided at the rear of the unit.
The AC cord set is removable, allowing it to be upgraded at your
will.
On/Off Switch
When operating the switch down, power is applied to the SXCD
compact disc player.