Perreaux Silhouette SXCD - Manual (Page 30)

29
Transport Component:
Width:
Disc Drawer Closed.............................................216mm (8.5”)
Disc Drawer Open .............................................335mm (13.2”)
Depth .....................................................................161mm (6.3”)
Height ..................................................................... 58mm (2.3”)
Weight
Gross ..........................................................................4.1kg (9.0lb)
Electronics Module ................................................... 1.7kg (3.7lb)
Transport Module...................................................... 1.6kg (3.5lb)
Specifications
Explained
THD+N ..................................................................0.0005%, @ 1kHZ
Total Harmonic Distortion + Noise is the percentage of output
signal which is made up of frequencies added due to harmonics
of the fundamental frequency and noise.
Frequency Response.................20Hz to 20kHz, +0.1dB -0.5dB
Shows that the amplitude or strength of the output signal deviates
by no more than 0.5dB over the entire audio band.
Analog Output Impedance ..................................................... 47Ω
A low output impedance ensures the analog output signal will not
be greatly degraded by the use of interconnect cables with high
capacitive or inductive properties.
Analog Output Voltage....................................................... 1.1V
rms
This is the maximum output voltage at 0dBFS, or a full scale
digital signal.
Signal to Noise Ratio ( unweighted ) ........................................ 105dB
The ratio of desired signal to noise signals in the output.
Perreaux engineers have designed the SXCD to maintain a low
noise floor.
Dynamic Range ..........................................................................96dB
The difference between the highest and lowest amplitude
portions of a signal.