Perreaux Silhouette SXCD - Manual (Page 7)

6
1 1 1 1 Unpacking and Placement
Unpacking
Procedure
The two components which comprise the SXCD CD player are
packaged for maximum protection. To open, sit each box upright
and cut the reinforced tape at the top of each box. Each module
can now be removed.
Pull the foam protecting end-caps off either side of each of the
modules and remove the black material covering.
The SXCD Compact Disc Player is now unpacked and ready for
further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x SXCD Compact Disc Player Electronics
1 x SXCD Compact Disc Player Transport
1 x Product manual
1 x Detachable AC power cord
1 x 50-way ribbon cable
1 x 75Ω coaxial cable
1 x BNC to RCA adaptor
3 x Performance analysis charts
Placing Your
SXCD
The SXCD should generally be placed close to your preamplifier
or integrated amplifier, thus keeping interconnect cabling
between the SXCD and associated components as short as
practical. This will reduce the systems susceptibility to radio
frequency (RF) interference and the negative effects associated
with long cables.
Ventilation
Requirements
The SXCD is a low power electronic device. Ventilation
requirements are not considered an important factor in product
placement.
In the event that the SXCD is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Physical Dimensions section of the manual (Chapter 13).