Perreaux Silhouette SXCD - Manual (Page 27)

26
1 1 1 11 1 1 1 Troubleshooting Guide
Please use this guide if you are experiencing any problems with
the SXCD in your system. It will provide possible solutions for
some given symptoms.
SXCD won’t
function
The unit is not turned on
Check the SXCD power switch is turned on.
Power not turned on
Check that the SXCD is plugged in to the AC mains and the
main power switch is turned on.
Faulty wall socket or mains lead
Make sure the AC mains wall socket is working properly and the
mains lead is not damaged.
Fuse is blown
A fuse is blown in your SXCD; please contact your Perreaux
dealer.
SXCD won’t
play a CD
CD in upside down
Make sure the disc is inserted the correct way up.
Disc is not a compatible format
Ensure the disc is a CD and of a compatible format, i.e. CD-DA,
CD-R or CD-RW. The SXCD cannot read data discs, unless
they are Mixed Mode and contain audio data.
The sound
skips
Scratched or dirty disc
Check the CD is not severely scratched and remove any marks,
smudges or dust.
There is no
output from
my system
Interconnect cables not connected
Make sure that the input and output interconnect cables are
plugged in and are connected to the respective RCA sockets on
the rear of the SXCD.
Not set to play
Ensure that the SXCD is playing the recording you would like to
listen to, and that pause has not been pressed.