Document Outline

• 1 Introduction
  • 1.1 At a Glance
  • 1.2 Menu Structure
• 2 Installation
  • 2.1 Unpacking and Mounting
  • 2.2 Connecting Cables
  • 2.3 Monitor Configuration
  • 2.4 System Configuration
• 3 General Use
  • 3.1 The Welcome Screen
  • 3.2 Using the Remote Control
    • 3.2.1 Navigation
    • 3.2.2  Selfview
      • 3.2.2.1 Local PC Display
    • 3.2.3  Picture Layout 
      • 3.2.3.1 Picture in Picture
      • 3.2.3.2 Picture outside Picture
      • 3.2.3.3 Auto Layout
    • 3.2.4  Mic Off
    • 3.2.5  Volume + and -
    • 3.2.6 Number and Letter keys
    • 3.2.7  Touch Tones
    • 3.2.8 Presets and Extension Numbers
  • 3.3 On-screen Indicators
  • 3.4 Using the Menu
  • 3.5 Make a Call
    • 3.5.1  Place a Call
    • 3.5.2    Add Call
    • 3.5.3 Call Settings
    • 3.5.4 SIP Services
      • 3.5.4.1 Add Call
      • 3.5.4.2 Transfer
    • 3.5.5 Streaming
    • 3.5.6 Dialing In From Outside the Enterprise
  • 3.6 Answer an incoming call
  • 3.7  End Call
  • 3.8 Standby
    • 3.8.1  Delay Standby for 1 hour
    • 3.8.2  Delay Standby for 3 hours
    • 3.8.3  Do Not Disturb
  • 3.9 Phone Book
    • 3.9.1 Call Log
    • 3.9.2 My Contacts
      • 3.9.2.1  Add New Contact
      • 3.9.2.2  New MultiSite Contact
      • 3.9.2.3  Edit Contact
      • 3.9.2.4  Delete Contact
    • 3.9.3 Global Contacts
      • 3.9.3.1 Up one Level
      • 3.9.3.2  Search
      • 3.9.3.3  Copy Contact to My Contacts
  • 3.10 Camera Control
    • 3.10.1  Move Camera
    • 3.10.2  Far End Control
    • 3.10.3 Camera Presets
    • 3.10.4 TANDBERG Tracker
    • 3.10.5 Picture Control
    • 3.10.6  Camera Tracking
  • 3.11 Presentation
    • 3.11.1  Presentation Key
    • 3.11.2 Presentation Menu
    • 3.11.3 PC Presenter (DVI/VGA Input)
    • 3.11.4 PC Soft Presenter and VNC
    • 3.11.5 Dual Stream (DuoVideoTF/H.239)
    • 3.11.6  Take New Snapshot
    • 3.11.7  Display Snapshot
  • 3.12 Services
    • 3.12.1  Request Floor and Release Floor
    • 3.12.2  Conference Layout
    • 3.12.3  Terminal Names
    • 3.12.4  Chair Control
    • 3.12.5  Assign Floor and Release Floor from Participant
    • 3.12.6  View Site and End View
    • 3.12.7  Disconnect Participant
    • 3.12.8  Terminate Meeting
    • 3.12.9 More about MultiSite (embedded MCU)
    • 3.12.10  Text Chat
• 4 Control Panel
  • 4.1  User Guide
  • 4.2 Diagnostics
    • 4.2.1 System Information
    • 4.2.2 Channel Status
    • 4.2.3 Call Status
    • 4.2.4 System Selftest
    • 4.2.5 View Settings
    • 4.2.6 IP Address Conflict Check
    • 4.2.7 Warnings
  • 4.3 Audio Demo
  • 4.4  Restart
• 5 System Settings
  • 5.1 General Settings
    • 5.1.1 Language
    • 5.1.2 System Name
    • 5.1.3 International Name
    • 5.1.4 Auto Answer
    • 5.1.5 Phone Book Settings
    • 5.1.6 External Services Settings
    • 5.1.7 Permissions
    • 5.1.8 Screen Settings
    • 5.1.9 Software Options
    • 5.1.10 Date and Time Settings
  • 5.2 Menu Settings
    • 5.2.1 Input Editor Language
    • 5.2.2 Menu Timeout in Call
    • 5.2.3 Menu on TV
    • 5.2.4 Menu on PC
    • 5.2.5 Balloon Help
    • 5.2.6 Number Key Mode
      • 5.2.6.1 Manual Number Key Mode
    • 5.2.7 Administrator Password 
    • 5.2.8 Kiosk Mode Settings 
    • 5.2.9 Startup
    • 5.2.10 Icons
  • 5.3 Presentation Settings
    • 5.3.1 Presentation Start
    • 5.3.2 H.239
    • 5.3.3 Startup Video Source
    • 5.3.4 Presentation Source
    • 5.3.5 Snapshot Source
    • 5.3.6 Auto-Display Snapshot
    • 5.3.7 PIP Placing
    • 5.3.8 Presentation Rate
    • 5.3.9 VNC Settings
  • 5.4 Call Quality
    • 5.4.1 Video Algorithm
    • 5.4.2 Audio Algorithm
    • 5.4.3 AAC-LD 128kbps (stereo audio)
    • 5.4.4 Natural Video
    • 5.4.5 Max Upstream Rate (kbps)
    • 5.4.6 Video Quality
      • 5.4.6.1 Intelligent Video Management (IVM)
      • 5.4.6.2 Native Resolutions
    • 5.4.7 Call Settings
  • 5.5 Audio
    • 5.5.1 Inputs
    • 5.5.2 Outputs
    • 5.5.3 Echo Control
    • 5.5.4 Stereo Settings
    • 5.5.5 Audio Leveling (AGC)  
    • 5.5.6 Alert Tones and Volume
    • 5.5.7 Graphical View
  • 5.6 Video
    • 5.6.1 Camera Tracking Mode
    • 5.6.2 MCU Status Line
    • 5.6.3 Floor to Full Screen  
    • 5.6.4 Web Snapshots
    • 5.6.5 MultiSite Picture Mode  
    • 5.6.6 Video Name
  • 5.7 Security
    • 5.7.1 Encryption 
    • 5.7.2 Encryption Mode
    • 5.7.3 Passwords
    • 5.7.4 Camera Standby Mode
  • 5.8 Network
    • 5.8.1 ISDN/External/Leased E1/T1
      • 5.8.1.1 ISDN-BRI Settings 
        • ISDN BRI switch type
        •  Line setup
        •  Advanced ISDN Settings
      • 5.8.1.2 ISDN-PRI Settings 
        • Number Range
        • ISDN PRI Switch Type
        • Channel Hunting
        • Line Settings
        •  Advanced ISDN-PRI Settings
      • 5.8.1.3 Leased E1/T1 Settings
      • 5.8.1.4 External Network Settings
      • 5.8.1.5 H.331 Settings
    • 5.8.2 LAN Settings
      • 5.8.2.1 IP Settings
        • DNS Settings
      • 5.8.2.2 H.323 Settings
        • Gatekeeper Settings
        • CallManager Settings
        • Advanced H.323 Settings
      • 5.8.2.3 SIP Settings
        • Display Name
        • Authentication
        • Current RFC’s and Drafts supported:
        • Media Capabilities supported in SIP:
      • 5.8.2.4 SNMP Settings
      • 5.8.2.5 IP Services
      • 5.8.2.6 Quality of Service
      • 5.8.2.7 IEEE 802.1x
    • 5.8.3 Network Profiles
    • 5.8.4 Data Port
    • 5.8.5 Restore Default Settings
• 6 Peripheral Equipment
  • Interfaces
    • 6.1.1 Video
    • 6.1.2 Audio
    • 6.1.3 Network
    • 6.1.4 Data port
  • 6.2 Document Camera
  • 6.3 DVD / VCR
  • 6.4 Additional Cameras
  • 6.5 Additional Microphones
  • 6.6 The TANDBERG DNAM and Speakers
    • TANDBERG 6000 MXP Profile, TANDBERG 6000 MXP, TANDBERG 7000 MXP, TANDBERG 8000 MXP and TANDBERG Maestro
      • The DNAM audio system is built on two specially designed and separate modules; the DNAM audio amplifier and the DNAM loudspeaker cabinet. The DNAM loudspeaker cabinet is based on several editions, one for each of the 6000 MXP, 6000 MXP Profile, 7000 MXP and 8000 MXP systems. For the 6000 MXP and the 8000 MXP system, the audio amplifier is integrated in the loudspeaker cabinet. For the Maestro system the amplifier and the loudspeaker cabinet is integrated directly into the system pedestal.
      •  
      • Using the external and optional Stereo Speaker Kit will improve the stereo sound, even on systems with integrated stereo speakers**. Note that the kit is not available for Mini-DNAM described below. Before connecting the Stereo Speaker Kit, make sure the complete videoconferencing system is powered down. When connecting the Stereo Speaker Kit to a system with already integrated stereo speakers, these integrated speakers will be disabled, and a new filter and specification setup is loaded when powering up the videoconferencing system.
        • TANDBERG 3000 MXP Profile:
          • The Mini-DNAM audiosystem is built on two specially designed and separate modules; the Mini-DNAM amplifier and the Mini-DNAM loudspeaker cabinet. The Mini-DNAM loudspeaker cabinet is stereo-configured and based on two versions made for fitting both the TANDBERG 3000 Profile 43’’ and 32’’ systems. The compact sized amplifier is mounted in the rear of the speaker cabinet.
  • 6.7 Stereo Speaker Kit
  • 6.8 Telephone Add-On
  • 6.9 Dual Monitor
  • 6.10 XGA Monitors and Projectors
  • 6.11 VESA Display Power Management
  • 6.12 Digital Monitor Power Management
  • 6.13 Extended Display Identification Data (EDID)
• 7 Appendices
  • Appendix 1: Technical Specifications
  • Appendix 2: Bandwidth Information for TANDBERG Endpoints
  • Appendix 3: Environmental Considerations
  • Appendix 4: Guidelines for Settings up Rooms for Video Meetings
  • Appendix 5: Security
  • Appendix 6: Using the File System
  • Appendix 7: Web Interface
  • Appendix 8: Connecting the System to PRI/T1
  • Appendix 9: Connecting the System to Switched 56 Network
  • Appendix 10: Connecting the System to ISDN using NT1 Network Adapters
  • Appendix 11: TANDBERG Cameras
  • Appendix 12: Remote Control (TRC3 / TRC4)
  • Appendix 13: Cisco Call Manager Registration
  • Appendix 14: Diagnostic Tools for IP
  • Appendix 15: System Upgrade
  • Appendix 16: Declaration of Conformity
  • Appendix 17: Dimensions
  • Appendix 18: Protocols Supported
  • Appendix 19: Cable Specifications
• 8 Glossary
• 9 Index