TOA Electronics N-CC2564 - Manual (Page 19)

19
6. Release the lock on the hinged portion of the base unit and connect the composite cable and power cable
extending from the base unit. (For details, please refer to p. 30; "CONNECTIONS.")
Open
Hinged portion
4
Cam
e
ra
dir
e
ction
Notch
Upper ceiling
Anchor bolt flush ceiling
mounting bracket
5
Cable entry opening
4. Attach the supplied safety wire to the anchor bolt for safety wire.
5. Attach the flush ceiling mounting bracket to the end of safety wire.
Note: Squeeze the cables after connection completion.