TOA Electronics N-CC2564 - Manual (Page 28)

28
Wall surface
Top cover
Saddle bracket and footing
C-BC511C or C-BC511C-S
Ceiling Mounting Cover (optional)
C-BC511W
Wall Mounting Bracket
(optional)
Network
Combination Dome Camera
Top cover
Footings and saddle bracket
on the camera mounting side
Suspension pipe
12. WALL MOUNTING
Use the optional C-BC511W Wall Mounting Bracket and optional C-BC511C or C-BC511C-S, Ceiling
Mounting Cover.
Note
Be sure to use the specified screws to mount the Network Combination Dome Camera and wall mounting
bracket, and ensure that they are securely mounted without any play.
12.1. Mounting Example
12.2. Mounting Procedures
1. Determine the mounting position, then make a mounting hole of ø50 – 60 mm on a wall.
2. Detach footings on the camera mounting side from the suspension pipe.
Removed footings and screws are attached to the base unit later. (refer to p. 24)