Tyan Computer THUNDER N3600QX - Manual (Page 32)

2.14 - Installing the Power Supply
There are six power connectors on your Thunder n3600QX (S4987). The
Thunder n3600QX (S4987) supports 12V and 5.5V SB input DPS power
supplies, please use below combination:
PWR3/7/8: 4-Pin PWR
Connector reserved for
Tyan 2U Barebone only
Refer to Diagram B for each power location.
PWR4: 4-Pin PWR
Connector for Tyan M1223
only
PWR2: PWR Main Connector
PWR6: 8-Pin PWR
Connector for Tyan M1223
and M1221
PWR3/7/8: PWR Connector reserved for Tyan 2U Barebone only (2Pin x 2)
PWR4: PWR Connector for Tyan M1223 only (2Pin x 2)
Signal Pin Pin Signal
GND 1 3 +12V
GND 2 4 +12V
32