Tyan Computer THUNDER N3600QX - Manual (Page 91)

91
Appendix IV: Recommended Accessory List
For integrating your Thunder n3600QX (S4987) into a 1U/2U system, you can
either equip your S4987 with the Tyan Barebone qualified accessories or use
others with the same specification as a reference.
Power Supply Unit
Below is detailed information of recommended power supply unit. You may
contact COLDWATT (PSU vendor) directly if having any interest:
www.coldwatt.com
Vendor COLDWATT
Vendor model name CWA2-1000-10-TY01
Tyan model name CPSU - 0240
Picture
Description 1000W PSU
Riser Card
The following provides information on riser cards of Tyan 1U/2U Barebone
solutions with S4987 motherboard. You may ask Tyan for support if having any
interest.
Tyan
model name
M2061 M2083 - RS M4987- HTX
Picture
Description
PCI-E to PCI-X
riser; 1U
PCI-E to PCI-E
riser, 1U
HTX riser card,1U
Installation
Location
PCI-E x 16 slot PCI-E x 16 slot HTX slot
Tyan
model name
M4987- 2U
Picture
Front view Rear view
Description (2) PCI-E x16 slots w/ x8 signal and (1) HTX slot, 2U
Installation
Location
PCI-E x 16 slot and HTX slot