Tyan Computer THUNDER N3600QX - Manual (Page 57)

3.8 PCI PnP Menu
You can use this screen to view PnP (Plug & Play) BIOS
Configuration Menu. This menu allows the user to configure how the
BIOS assigns resources & resolves conflicts. Use the up and down
arrow (З/И) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option. The settings are
described on the following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Advanced PCI/PnP Settings
WARING: Setting wrong values in below sections may
cause system to malfunction.
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
[No]
[No]
[64]
[Yes]
[Disabled]
[Enabled]
Clear NVRAM during
System Boot.
←
→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
57