Tyan Computer THUNDER N3600QX - Manual (Page 50)

Enabled
Resume On LAN (MAC)
Disabled
Disable/Enable LAN(MAC) to
generate a wake event.
Enabled
Resume On Ring
Disabled
Disable/Enable RI to generate a
wake event.
Enabled
Resume On PS/2 Keyboard
Disabled
Disable/Enable PS/2 Keyboard
to generate a wake event.
Enabled
Resume On RTC Alarm
Disabled
Disable/Enable RTC event to
wake after a power failure.
3.7.6 Event Log Configuration Sub-Menu
You can use this screen to view the Event Log Control Menu. This
logs system events (such as Clear CMOS, ECC memory errors, etc)
and writes the log into NVRAM. Use the up and down arrow (З/И)
keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the
following pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Event Logging details
View Event Log
Mark All Events as Read
Clear Event Log
View all unread events
on the Event Log.
←
→ Select Screen
↑↓ Select Item
+/- Change Option
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
Event Logging details
View Event Log __
Views all unread events on the
Event Log.
OK
Mark All Events as Read
Cancel
Marks all unread events as
read.
OK
Clear Event Log
Cancel
Erases all of events.
50