TurboChef Technologies 2020 - Manual (Page 31)

OVEN MODES
Config Mode
The CONFIG MODE (Figure 12) serves four main
purposes:
1. To access the smart card screen.
2. To access the fault count screen.
3. To access the
SETUP MODE .
4. To access the TEST MODE (service use only).
To access the CONFIG MODE , press the up key from
the OVEN OFF MODE .
Smart Card Screen (Loading a Menu)
The smart card screen allows the user to
-Load a menu from smart card to oven.
-Save a menu from oven to smart card.
To load or save a menu,
1. Press L3 (Figure 12) to access the smart card
screen (Figure 13).
2. Insert a smart card into the smart card slot
(Figures 14 and 15), with the gold chip
facing the front of the oven.
3. Load or save a menu.
- Press R1 to load a menu from the smart
card to the oven (Figure 13).
- Press R2 to save a menu from the oven to
the smart card (Figure 13).
Accessing the Fault Count Screen
From the CONFIG MODE (Figure 12), press R1 to
access the fault counts screen (Figure 16, page 16).
The oven will display the number of faults that have
occurred.
Accessing the Setup Mode
From the CONFIG MODE (Figure 12), press L1 to
access the SETUP MODE . The SETUP MODE allows the
user to customize several oven settings - see below
for more details.
Setup Mode
Figure 17, page 16.
The SETUP MODE serves four main purposes:
1. To change the display temperature.
2. To access the edit option screen.
3. To change the display language.
4. To access the info screen.
To access SETUP MODE , press the up key from the
OVEN OFF or COOLING DOWN MODE (to access the
CONFIG MODE ), and then press L1.
INSERT SMART CARD
PRESS [BACK] TO EXIT
SMARTCARD
FAULTS
CONFIG MENU
SETUP
TEST MODE
Figure 12: Config Mode
LOAD FROM CARD
SMARTCARD
SAVE TO CARD
Figure 13: Smart Card Screen Figure 15: Insert Smart Card Screen
1 5
Figure 14: Loading a Smart Card
L1
L2
L3
R1
R2
R3
L1
L2
L3
R1
R2
R3
L1
L2
L3
R1
R2
R3