Toshiba DKT2004-CT - Manual (Page 106)

Appendix
CO Line Access Codes
94
Strata DKT2004-CT Cordless Digital Telephone 9/00
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a
&2 or /LQH button, you can enter the appropriate code listed in Table 1 to access an
outside line.
You can also store the code on a 6' button for one-touch access. If you are storing a
CO line access code onto a Speed Dial code, enter  before the CO access code (e.g.,
to store code  , enter  ).
In some systems, is used as a general group code or to access Least Cost Routing
(LCR). System users are required to dial in order to access an outside line. If you
press in a system programmed with LCR, you may not hear internal dial tone,
depending on system programming.
See your System Administrator for the code which applies to your telephone.
➤
To access a line
➤
Press [PDN] + CO Line Access Code.
Notes
♦ a access line groups 1~16, respectively.
♦ a  access individual lines 1~200, respectively.
Table 1 CO Line Access Codes
System CO Line Access Codes
DK14
a or a 
DK16e a or a 
DK40 a or a 
DK424 (RCTUA)
a or a 
DK424 (RCTUBA/BB) a or a 
DK424 (RCTUC/D) a or a 
DK424 (RCTUE/F) a or a